Hot selling Cheap Concrete Mixer for sale
  • Hot selling Cheap Concrete Mixer for sale

Hot selling Cheap Concrete Mixer for sale

 Concrete mixer two maintenance cycle is generally 700 ~ 1500h hours of work, two maintenance in addition to a maintained work, must be overhauled gear unit, motor and open gears, in addition to the need to check the machine and the material control mechanism

Hot selling Cheap Concrete Mixer for sale Features and Benefits :

 

Two maintenance

Concrete mixer two maintenance cycle is generally 700 ~ 1500h hours of work, two maintenance in addition to a maintained work, must be overhauled gear unit, motor and open gears, in addition to the need to check the machine and the material control mechanism, cleaning the road wheels and the steering mechanism and the like. 1. dismantling the reducer shall wash gear, shaft, vomiting and oil channels, check the wear surface dismantling halogen profile is completed, add new gear oil. 2. Dismantling the motor should remove dust on the stator windings, cleaning bearings and filling new grease, check and adjust the gap between the stator and the rotor. 3. Dismantling the open gear, the need to clean the gear tooth profile, weeks and bearings, checking wear, excessive wear should be replaced. The material on the inner and outer clutch brake band, such as excessive wear should be replaced. 5. The concrete mixer chassis skew deformation, should be repaired or corrected. 6. Dismantling the amount of water, a straightened position of the sleeve, remove the suction pipe and casing around and rot and rust on the inner lever on the brush rust. 7. When the check split three-way valve, the valve chamber should be cleared and pipe joints nearby rot rust and scale, so to keep the waterway open. 8. specific institutions, such as rubber roller, the trip switch, meter, solenoid valves, etc., can be adjusted periodically check and cleaning according to the situation.

 

Manner by means classification

⑶ divided manner by means of fixed and mobile two. Fixed mixer is installed in the pre-prepared, based on the machine can not move. It's bulky, high production efficiency. Used for mixing plant or mixing station. Mobile mixer itself with wheels, and the small size, light weight, so good mobility. Apply to small and medium sized temporary works.

A material way by Category

⑷ a promising material way tipping points and non-tipping two. Tilt-stirring drum by tipping discharge, rather than relying on the Tilt-stirring drum reverse discharge.

Shape classification

⑸ by stirring drums of different shapes, there are pear-shaped, drum-type, double cone, vertical shaft and a circular groove disc horizontal axis five. The first three lines since the fall mixing; the latter two for the compulsory mixing, less domestic use.

Classification by mixing capacity

⑹ points by stirring a large capacity (discharge capacity of 1000 ~ 3000L), medium (discharge capacity of 300 ~ 500L) and small (discharge capacity of 50 ~ 250L). Common models mixer Classification and designation as shown, it is mainly by the model number and the main parameters. As JZ350 said: discharge capacity of 350L, tapered, reverse the material is self-loading mixer.

Concrete mixers, including through the shaft and the conveyor

Configuration and power mechanism connected by the drive mechanism drives the drum, the drum barrel tops barrel drum set around the ring gear is provided on the drive shaft and a ring gear. It has a simple structure and reasonable use gears, ring gear after, can effectively overcome the skidding when rain and fog weather, roller and mixers between the rollers; the transmission mechanism can be used to further ensure the elimination between the idler roller and mixers The slippage. Divided by the intermittent nature of the work (batch) and continuous; by mixing principle points from the fall-and compulsory; according to the installation of fixed and mobile points; by the way of sub tipping material and non-Tilt; Press the mix in the form of cylindrical structure sub-pear type, drum cartridge, double cone, disc vertical shaft and horizontal axis of the circular groove and the like. Since the fall mixer: There is a long history, back in the early 1900s, driven by a steam engine concrete mixer drum cartridge has begun to emerge. After the 1950s, reverse the material type and tipping the material type of double cone blender and split drum mixer, etc. have come out and get development. Self-loading concrete mixer mixes the barrel wall radially arranged stirring blades. After the operation, the mixing drum rotation about its horizontal axis, adding mix barrel material, is raised to a certain height blade, falling by its own weight, this cycle of movement, to achieve uniform mixing effect. From a simple fall concrete mixer structure, generally stirred plastic concrete based.

Please leave a message, our saler will contact you as soon as possible!

  • *Name:
  • *E-mail:
  • Tel:
  • Company:
  • *Country:
  • *Inquiry:
Customer Reviews :
Frequently Questions :

Hot Products

  • Concrete Mixing Drum Concrete Mixing Drum

    1. Concrete mixing tank with Superior performance2. High quality of hydraulic system3. The design of low angle of inclination4. Simple operation and useful application5. Multi types of Chassis Matched

  • Concrete Mixer Truck Concrete Mixer Truck

    1. adopts European modern style2. featuring attractive appearance3. rational structure and stable performance4. different steel materials for different parts of tank body5. Multi types of Chassis Matc......

  • Self-loading Concrete Mixing Station Self-loading Concrete Mixing Station

    1.Equipment Type: Self-loading concrete mixing station2. Model: DS3.53. Productivity: 14m3/hr4. Weight: 7500KG5. Dimension LxWxH: 7.1x2.44x3.3m

Contact Us

Tel: +86-371-86108011
        +86-371-86108022
Fax1: +86-371-86108033
Fax2: +86-371-87575501#812
Mobile: +86-15093371337
Email:sales2@cndasion.com
Address: Dongfeng road, Jinshui zone, Zhengzhou, Henan, China.