Steps On How To Installconcrete Batching Plant Machine

 Steps on how to installconcrete batching plant machine, concrete mixing plant before the installation, should according to the packing list all the parts of mixing plant and attachment inventory, check the machine transport damaged in the process condition, if has the damage, should carry on the repair, and clear equipment soot formation and sundry.
(1) according to the ground plot make layout and foundation construction, to ensure that the corresponding position size accurate, and level calibration basic level. Host and cement silo foundation should be well.
(2) will host hanging from the ground appropriate height.
(3) will leg on the basis, a pin to that of the main chassis connection.
(4) using bolt will leg contact box connection is good, then carefully check whether all connections firm, finally slowly and to crane.
(5) installation platform, ladder and rail.
(6) installation intermediate aggregate bin and cement weighing hopper, water weighing hopper.
(7) will aggregate surge bin leg installation in place.
(8) installation sandstone weighing belt conveyor, sandstone weighing hopper.
(9) will surge bin lifting in position, and connect bolt.
(10) will be big inclined belt machine in position, and connect all kinds of bolt.
(11) installation water supply system, etc.
(12) will cement bin support on ground installed and is located in a basis.
(13) will upper and lower material level meter, ladders, rail, cement feed pipe, screw conveyor lifting rope etc pack good, with a crane hoisting cement bin on the stent, the bolt fastening, check and correct retreat to crane.
(14) will be two screw conveyor in the ground assembly, then feed end and cement bin is linked together, discharge end and cement metering device connected.
(15) connect the gas circuit system.
(16) electric system installation.
All electrical components installed in electric box and console, in the external connection before, first check each part of the electrical components are intact, fixed firmly.
According to the wiring diagram A connection electric box and console and the motor, electromagnetic valve, travel switch, light connection, and according to the electrical principle chart review.
B to have good grounding protection measures.

Pre :  Batching Plant Control System Introduced

Next :  The Application Of Small Concrete Mixer