Block Making Machine Maintenance Common Sense

2012-11-27 09:41:13

In recent years, along with the highway, railway development, the new Block Making Machine has been widely used. "So a knowledge of common Block Making Machine maintenance and safety knowledge is very necessary. Because any mechanical equipment in use process in the hard to avoid can more or less appear some problems, known as the Block Making Machine maintenance and safety knowledge can not only improve the Block Making Machine equipment work efficiency, at the same time, it can prolong the service life of Block Making Machine, bring the most benefit to users. Introduced the next Block Making Machine maintenance safety some knowledge:
First, the regular stop open door window observation impingement Block Making Machine internal wear, the centre enters the material tube, cone cap, impeller, the runner plate, circular plate, wear-resisting Block of wear and tear, after wearing should change in time or repair, replace the wear-resisting Block should be replaced, ensure that wear piece of the same weight. It is strictly prohibited to crusher work process open door window to observe internal work, in order to avoid has the danger. Find impeller body wear change in time to find manufacturers repair. Pay special attention to, without manufacturers agree, it is strictly prohibited to secretly homemade impeller.
Second, drive triangle belt tensioning force size should be adjusted properly, in order to ensure triangle tape force uniform, double motor drive, on both sides of the triangle tape should carry on the grouping matching, and the degree of each team leader as far as possible consistent. Should be adjusted to make the two motor current difference not more than 15 years.
Third, Block Making Machine using mobil motor grease super or 3 # lithium base grease, each work 400 hours adding suitable amount of grease, work 2000 hours open the spindle assembly to bearing for cleaning, general work 7200 hours, change new bearing. Spindle assembly upper bearing for floating end, bottom bearing for fixed end, the assembly to hand open pulley should be flexible rotation. In the Block Making Machine operation, because of this equipment is of high speed equipment, should pay special attention to safety in production. 



Pre :  Avoid Burning Block Making Machine Fault Processing

Next :  Block Making Machine In The Cause Of The Vibration

Hot Products

  • Concrete Mixing Drum Concrete Mixing Drum

    1. Concrete mixing tank with Superior performance2. High quality of hydraulic system3. The design of low angle of inclination4. Simple operation and useful application5. Multi types of Chassis Matched

  • Concrete Mixer Truck Concrete Mixer Truck

    1. adopts European modern style2. featuring attractive appearance3. rational structure and stable performance4. different steel materials for different parts of tank body5. Multi types of Chassis Matc......

  • Self-loading Concrete Mixing Station Self-loading Concrete Mixing Station

    1.Equipment Type: Self-loading concrete mixing station2. Model: DS3.53. Productivity: 14m3/hr4. Weight: 7500KG5. Dimension LxWxH: 7.1x2.44x3.3m

Contact Us

Tel: +86-371-86108011
        +86-371-86108022
Fax1: +86-371-86108033
Fax2: +86-371-87575501#812
Mobile: +86-15093371337
Email:sales2@cndasion.com
Address: Dongfeng road, Jinshui zone, Zhengzhou, Henan, China.